A Very Windy H3.5 Heat

A very windy H3.5 heat from our latest Swedish Hydro Nats. It's me in the purple KEP's T3-21 (proto) with VS Speed M2101 engine and new prototype Hipex exhaust and Mattias Bengtsson in the pink KEP's T2-21 that survives the heat. :)

A Very Windy H7.5 Heat

A very windy H7.5 heat from our latest Swedish Nats. Im the only one surviving. :)

KEP's T2-45 prototype with NR45 power.

 

FSR-H & FSR-O Results Swedish Champs #2 2015

Here is the results from the Swedish Nats Race in FSR-H & FSR-O held in Oxelösund beginning of June.

The race was good but the weather on Saturday was a bit cold. On Sunday it was fine weather but even more windy.

Pics from the race HERE

Inbjudan SM3 FSR-H & OTA Ludvika 2015

Tävlingen är INSTÄLLD på grund av för få anmälda (endast 6 pers totalt!?)

Ludvika MBK inbjuder till SM3 i FSR-H och OTA.

 Lördag 27 Juni (och eventuellt Söndag 28/6).

Notera att i den första PDF inbjudan som laddades upp på SMBF sidan så står det en felaktig mailadress att anmäla sig till - den här är dock den korrekta!

PDF länk

Inbjudan SM2 FSR-H, Hydro FE-4S, OTA & FSR-O

Inbjudan till SM2 i Oxelösund den 6-7 Juni 2015!

Klasser:

FSR-H, Hydro FE-4S, OTA och FSR-O

Inbjudan som PDF

SM1 2015 FSR-H, OTA & FE-4S Frövi

Tävlingen är INSTÄLLD!

Inbjudan till årets första Hydro & OTA rejs i Frövi Lördagen den 16 Maj!

Hitta Till Frövi

Karlskoga RCBK

Inbjudan som PDF

 

REDS M7T Mario Rossi Tuned Marine 3.5

A new REDS Racing 3.5 marine engine tuned by Mario Rossi called M7T. The engine seems to be based on an earlier Picco M7 On-Road design that uses the normal long stroke ratio = 16.9x16.2 mm. (The newer Picco engines and some REDS on-road car engines use an longer stroke that seems more fashionable the latest couple of years = 17.3x16.03 mm).

• Displacement: 3.5 cm3
• Bore: 16.2 mm
• Stroke: 16.9 mm
• Inlet ports: 7 (no info available on transfer & boost timing numbers)
• Exhaust ports: 3 (no info available on the exhaust timing)
• Crankshaft: Balanced with silicone ramp (no info available on the timing numbers)
• Front ball bearing: Swiss Made  Rubber Shielded 7 x 19 x 6 mm
• Rear ball bearing: Swiss Made Hybrid Ceramic 14 x 25.4 x 6 mm
• Carburetor type: rotary / 2 needle (no info on venturi diameter)
• Glow plug: TS7
• Weight: 310 g
• Cylinder system: ABC

Available at: TOP RC (Slovenia) or PMB in the UK

Manufacturer: REDS Racing

Martin Truex Jr Record 45 Hydro SAW Run

Martin Truex Jr's new 45 SAW Record Run @ the recent Huntsville Record Trials:

• 119.744 MPH = 192.7 KMH

New SAW 3.5 Hydro Record By Martin Truex Jr

Martin Truex Jr's new SAW record run in Hydro 3.5:

• 109.836 MPH = 176.76 KMH!

Preliminary Timetable Naviga FSR WC2015

Preliminary timetable and layout of the race site is now published for the Naviga 2015 FSR World Championships in Görlitz Germany.

Download HERE.