New IMPBA D-Hydro (45) SAW Record

IMPBA D-Hydro (45) SAW 2019 Record

Martin Truex Jr sets a new IMPBA record in D-Hydro (7.5/45) = 135.3 MPH / 217.74 KMH

SAW Nitro Record 134MPH = 215 KPH

SAW Nitro World Record 134MPH = 215 KPH!

Earlier this April Martin Truex Jr set a new straightaway world speed record in a SAW event in Huntsville with an impressive 215 KPH!

• Average 2-way speed: 134 MPH (215 KPH)
• Fast past: 135.054 MPH (217 KPH)
• Motor: CMB VAC .91
• Prop: ABC 2727 - 19° rake - 38% blade area
• Radio: Futaba

Looking for JAE 45GT pics

Looking for pictures on the JAE 45GT kit from ZippKits

Is there anyone that has an JAE 45GT that can help us out with some pics of a complete boat and/or video of it running?

The pics and/or video will be used for a product article/promo.

(Fyi: the earlier question for tech-info of it is solved)

If you have any pictures or video please e-mail them (or links) to me -> niklas@minicars.se

Thanks in advance! :)

JAE 21GT from Zippkits

JAE 21GT Heatracing Kit from ZippKits

Zippkits has released an updated version of their popular 3.5 cc hydro called JAE 21GT (G stands for Geraghty and T for Truex).

Features:

• Optimized for Heatracing by Martin Truex Jr

• Handles rough water better with improved cornering

• Total Length: 35" (889 mm) vs the JAE 21G2 Length: 31.14" (791 mm)

• 3" Longer tub vs the JAE 21G2

• After-plane length (end of ski to end of sponson ride pads): ?

• Engine center to end of ski length: ?

• Lower tub sides

• Narrower Ski width

• Sponsons ride-pad AoA: ?

• Ski AoA: ?

Weight: aprox. 1940 g (RTR without fuel)

• New much thicker turn-fin made of 7075 aluminium (.093"/2.36 mm!)

• New aluminium sponson tube inserts

• The kit's lazer-cut parts have been upgraded so it will stay truer and straighter during assembly

• Pre-drilled motor mount holes for Zippkits new Super Mounts (optional)

• New Polyester/Fiberglass cowl (optional)

 • New pre-bent flex tube (optional)

ZippKits JAE 21GT Product Link

JAE 21GT Manual Link

Help!
If anyone that has got an 21GT could measure the missing info on the above list and e-mail me that (niklas@minicars.se) I would be happy. Those are:
• After-plane length (end of ski to end of sponson ride pads)
• Engine center to end of ski length

• Sponsons ride-pad AoA

• Ski AoA

JAE 21GT built by Mike Walker

JAE 21GT built by Adam Blevins / www.abmods.com

Speedweek @ Blue Lake

Glenn Quarles with his Novarossi .12 equipped rigger at the recent Speedweek @ Blue Lake in Valdosta GA (USA. His official new record landed at 97.444 MPH (156.82 KMH) average. His fastest one-way speed was 103.83 MPH (167 KMH)!

• Motor: Novarossi Plus 12-3 SCT with some Martin Truex Jr "massage"
• Pipe: Own built with input from Scott Bouichie (orange silicone tape by MTJ)
• Fuel: 70% with lots of castor oil (recin)
• Prop: ABC 1523 (stock woth a little cup ground out of it)
• Drive: .062" wire drive
• Boat weight (RTR): 1lb 6 oz (624 gr)

 

 

 




Here is Martin Truex Jr's new oval-trials record run with his twin JAE/TRD 45. The run was on a 1/3 mile oval and the 2-laps was done in 16.342 seconds!

Martin Truex Jr Record 45 Hydro SAW Run

Martin Truex Jr's new 45 SAW Record Run @ the recent Huntsville Record Trials:

• 119.744 MPH = 192.7 KMH

New SAW 3.5 Hydro Record By Martin Truex Jr

Martin Truex Jr's new SAW record run in Hydro 3.5:

• 109.836 MPH = 176.76 KMH!

Huntsville Record Trials 2012

Huntsville IMBPA Record Trials November 24-25, 2012:

Martin Truex Jr        A Hydro 1/3 OVAL           19.019 sec
Martin Truex Jr        D Hydro 1/3 OVAL           16.999 sec

David Hall                B O/B Hydro SAW            2.939 sec    76.556 mph
David Hall                B O/B Hydro 1/3 OVAL   24.168 sec
David Hall                P Hydro 1/3 OVAL          19.964 sec
David Hall                S Hydro 1/3 OVAL          20.164 sec

Mark Bullard            Twin Hydro 1/3 OVAL     18.423 sec

• A = 2.1 cc
• B = 3.5 cc
• C = 4.9 cc
• D = 7.5 cc
• E = 11 cc
• F = 30 cc
• N = 1.2-7.4V
• P = 8.4-14.8V
• Q = 15.6-22-2V
• S = 22.8-29.6V
• T = 33.3-37.0V

• The 1/3 mile oval course has 100.58 m long straights
• The radius of the corners is 10.66 m
• Total length: 268.22 m

Truex quite fast with his 2.1 cc hydro.


Hall's record run with a JAE OB 21 hydro. Novarossi power.



Hall's record oval S-hydro run.



Truex oval record run with his Novarossi 46DD powered JAE45 - 8 second laps! :)

 

Martin Truex Jr and his hobby!

NASCAR Sprint Cup driver Martin Truex Jr (current position 6:th in the series - May 2012) is one of the guys behind the JAE outriggers - here he speaks about his RC boat hobby! Click on the picture... :)

JAE 45 Twin PDF's

The JAE "syndicate" has just released their JAE 45 Twin design design!

As usual, save the pdf's on your favorite storage media (like an USB stick) and go to a printshop (Kinkos or reprographic print shop etc) and have them print the pdfs in 1:1 scale on 30" x 42" paper.

Click HERE for the first of three pdf's.


Click HERE for the second of three pdf's.


Click HERE for the third of three pdf's.

JAE .45G - 2011 edition

The J.A.E. Racing gang have just released the new 2011 edition of their JAE .45G outrigger!

JAE .45G 2011 spec:

• The tub is shorter, narrower, higher above the water and with a updated lower side profile.
• The after-plane is shorter (T.E. of ski vs T.E. of front sponson ride pads).
• The rear ski is wider (1.43" now vs 1-3/16"" earlier).
• The front sponson ride pads have less AoA (now aprox 4.4 deg).
• The front sponsons upper deck has more negative AoA.
• The front sponsons are longer (especially towards the rear).

Here you can find some info about the first JAE .45HG version.

As usual, save the pdf's on your favorite storage media (like an USB stick) and go to a printshop (Kinkos or reprographic print shop etc) and have them print the pdfs in 1:1 scale on 30" x 42" paper.

Go fast - turn right! :)

Download the JAE .45G 2011 (1of2) pdf drawings by clicking HERE.

Download the JAE .45G 2011 (2of2) pdf drawings by clicking HERE.

Here is a new comparison picture with the two JAE .45 riggers on top of each other. They are aligned from the trailing edge of the ski as its the rear most contact point of the boat.

• The new 2011 JAE .45G is the black one.
• The earlier JAE .45HG is the blue one.

JAE .21G Prototype in testing

Here's a Martin Truex Jr. built JAE .21G prototype in testing in South Carolina... Equipped with a Mac 21 with a OPS 3280 pipe and a H7 prop -> it moves! I wished I had a testing lake nearby like that... ;)

JAE .12G (formerly known as JAP .12G)

Great news from USA. :)

Jack Ass Performance changes it's name to "JAE" and makes the .12G outrigger hydroplane that I published as drawings earlier as a CNC cut wood & foam kit.

The kits will be sold by Zippkits.com in the US and there will also be a build service (in the US) by Mike Crawford of Woodstuff tunnels. Scroll down this page for more info of this fast nitro rigger!

If you like to build and cut it yourself you can find the earlier info HERE.

There will also be some JAE .21 & .45's and maybe also a Gas rigger as plans and kits - Stay Tuned more more info of these riggers!



This is a quoted text from Rod Geraghty in a forum thread at International Waters forum where he presented us with the news:

"Some history.

Nine years ago David Hall and myself started talking about building a dirt simple competitive outrigger hydro.We had moderate success but that effort kind of fell off our "hot" priorities list.

About 3 years ago our interest in the boat design once again re-surfaced.
Over a year ago now a totally accidental joint venture was formed with David Hall, Ron Zaker Jr., Martin Truex Jr. and myself. The common thread we all had was to go fast in all kinds of water with a stable simple outrigger hydro.We have learned a lot and the performance of the boat has been nothing short of amazing. The result of this joint venture was the release of the JAP .12G plans (se HERE). The interest in those plans has been phenomenal. I am guessing that somewhere between 500 & 600 sets of these plans have been downloaded all over the world.

Now for the last 3 weeks... J.A.P. [Jack Ass Performance] has officially changed our name to JAE , AKA "J" boats. The JAP .12G is now the JAE .12G.
What does JAE mean? We will never tell... :D It means whatever you think it means...;)

Here is the news:

The JAE .12G will be offered as a CNC precut plywood and foam kit from Zippkits for a introductory price of $39.00 + shipping!

Included will be solid fiberglass boom tubes with an illustrated instruction manual.
Zippkits sells boat kits all over the world and we did not want the name JackAss Performance to get in the way of the offering of these kits to the RC boater. I am presently building the first kit from Zippkits and I will tell you this is a quality kit.

Go to ZippKits.com

Presently there are prototypes of a .21H [Hall], a .21G [Geraghty], a .21T [Truex] & a .45H [Hall] JAE boats on the water being tortured. Also as we speak there is also a "gas" JAE boat on the building jig.

We cannot speak for Zippkits but it is JAE's eventual hope to have a line of competitive inexpensive wood/foam rigger kits and or plans available for the RC model boater to experience the fun of building and running RC raceboats.

For those of you who are not comfortable with your building skills, Mike Crawford of Woodstuff tunnels [1-262-210-9403] will be offering a building service for the line of JAE racing hulls.

We don't have an exact release date for the JAE.12G from Zippkits but I do know it will be very soon.. ;)

JAE is a "very non-profit" [not one red cent] joint venture, hence this posting in the outrigger hydro forum. :)

Rod Geraghty"